Tillandsias or Air Plants are tropical plants that usually live for several years however will bloom and produce flowers only one time during their lifetime.
The flowers are striking and brilliantly colored, and the bloom period will last from several days to many months, depending on the species. Take the Rubra on the left for example, we are about 2 months in and the blue flower is not fully grown yet. Have a look below and find it a bit further along. The C. Medusae, 2nd picture below, is about 4 months into the process and the dark blue to purple flowers have yet to grow out of the pink capsules. Different species bloom at different times, also depending on their care and environment. Although I have seen it happening all year around it is said that a plant will most likely go into bloom sometime between mid-winter and mid-summer.
Each pup will follow the lifecycle by growing into a parent plant, blooming and producing pups of it's own.
If you require pups for your project please feel invited to get in touch as I will often be able to help.
Air Plants will produce offshoots, or "pups." You'll notice the pups have a separate and distinct center of their own, distinguishing them from the other leaves. Once the pup reaches at least one-third of the size of their parent plant, the pup can be removed by gently pulling it apart from the parent. Some recommend to use knifes, however I found the pulling apart after the plant has been watered was the kindest method for the parent and pup plant to be separated. Hold both the parent and the pup at their bases and gently twist in a downward motion.
You have done the basics - water, air and love. You are ready for the next step and your Air Plant/s too?
Well ok, let's do this!
What if have been traveling and couldn't keep to my watering routine?
If you use the once week 20 minutes bathing method like me don't worry too much, as long as your Air Plant is still alive you give it first of all water. Don't forget best is filtered
Please allow it to soap this time for about 2 hours. Shake excess water off as usual, let it dry [best upside down] and it all is good place it onto it's concrete holder.
Done that, but it does not look really happy just yet?!
Yep I can imagine. Let's get the scissors out!
A bit of grooming is needed. It is normal that lower leaves of your tillandsias dry out as the plant grows. Sometimes even due to climate change or because of the simple fact that there was not enough water. You can pull those leaves off, gently please.
If a leave is broken or the tip has dried out you will have to trim. The trick here is to trim in an angle to leave a natural pointy looking tip. However, don't worry it will do fine if the aesthetics of a straight cut appeals more to you.
Don't be shy or worry too much about harming your Air Plant - it will regrow.
And there is also the option of Fertilizer and Temperature adjustment to really make up for your oversight!
Always have your Air Plant enjoy temperatures above 45 degrees Fahrenheit / 8 degrees Celcius. However best is 50 - 90 degrees Fahrenheit / 10 to 32 degrees Celcius will help them even more.
Fertilizing your air plant/s is nothing you need to necessarily to do. I mean I have not done it yet and these magical plants showed the beauty in blue, purple and pink once or twice already.
However, you keep them in top shape and could promote reproduction if you do.
There are special fertilizer out there but I have been told a water-soluble fertilizer will do. By that I mean stuff like Mircal-Grow or Rapid Grow, houseplant fertilizer at 1/4 strength or lower. Well, I would love to hear your insides as I have not done it so far.
I hope you enjoyed this little post - cheers to happy Air Plants and I look forward to your comments and pictures via the social
media links or email!
Woop woop, they have arrived!
Do you like a hot wonderful bubble bath? - guess what, your Air Plant does too!
Unbelievable right?! - but if you really want / need to do something really nice for your Air Plant prepare a lukewarm bath from -just- filtered water for it. Use the soaking method and you will literally see you Air Plant grow stronger right there.
Take your plant out once the leaves are strong and fully soaked up, anything from 20 to 50 minutes. Don't forget to let it dry fully before nesting it back.
There, that's it, another low cost Air Plant caring secret shared.
Happy Air Plant doping,
It is no secret that I simply love - no green thump needed - Air Plants and who says we have to wait for spring when we can enjoy these living beauties and their beautiful white green and orange pink red shades right now. Pimp your room, bookshelf, desk or wall, get your indoor gardening started with my new Tillandsia collection and unique concrete holders to suit your style.
Psst ... looking for care tips and more about Air Plants? - my HOW TOs might hold the answer you are looking for, enjoy!
As you may know there is a great variety of Air Plants available yet I have chosen just a few. Why?
Not just the size or sturdiness are points to consider but also the question of which light is preferred as the worry of displaying them together should not arise.
So here it comes, don't worry you will find a spot, as they are happiest when they are kept where they will receive bright, indirect sunlight or under fluorescent home or office lighting.
Yes! That's why they are happy on your desk and looking good and trendy in their concrete vessel.
What else? - of course if you love them you water them!
Well, there are many methods out there from letting them soak under rinsing water to spray regularly.
To me the rinsing water method is out of the question - water should never be wasted!
Water spraying them is, as I find, too messy for desk or sideboard displays. Well of course this is up to you but best results, and you know I shout out loud when I managed to get them flowing bright, is the soaking method. It's nice and easy.
Once or twice a month I give them a good bath and we all are happy. I do it more often if the air is really dry but you will soon see when the leaves are not so strong anymore and it requires more water.
Maybe one last tip [as written on the small info card delivered with your plant] use filtered water or rain water as sometimes tab water contains to much lime.
Woop woop, they have arrived!
First of all take time to admire and fall in love with these magical creatures after all no soil, no proper roots yet beautifully living of water, air and love.
Best thing to do to welcome them home is to give them a good soak in a water bath. Submerge them completely in water for about 20 minutes but don't worry if you have them bathing a little longer.
Gently take them out, best hold them upside down and shake off / remove any excess water. If you think the plant feels still a little wet and you want to be on the save side just have it rest for a little while upside down.
Looking Good! Take your happy Air Plant and set it on/in your concrete vessel. The recess should provide enough air circulation and when you place it now in a bright light spot a lifelong bond could just have begun.
Congratulations and don't be shy to share, ask or comment and feel invited to show your success I sure love to see!
Sorry I have been so quiet all week but I am luckily busy with four custom orders - which are due to be finished this week.
This is one of them but not to worry I will be adding more details on my custom page soon.
Well let's get back to work!
have a fantastic day,
lots of love and creativity,
Similarly to stone concrete has a very high compressive strength while not performing to well under tension. During the 1850s European engineers tackled this problem by inserting steel bars into the concrete.
The solution – reinforced concrete – was born and is now more common than concrete on its own. The reinforcement used is mainly steel in the form of bars and meshes and structural fibres made of various materials.
The facts have been curated by Guest Blogger Heidi.
Enjoy! We looking forward to your comments and your next visit.
Concrete comes from the Latin word “concretus” and means hard and compact. The material was already in use a couple of thousand years ago and many Roman structures like the dome of the Pantheon in Rome remain to the current day.
Today cement is readily available all over the globe making concrete the most commonly used man-made material.
The facts and sketch are curated by Guest Blogger Heidi.
We hope you enjoy these little 'Good to Knows' and are looking forward to your comments and your next visit.
The word concrete means that something exists in reality but in the construction industry it refers to the stonelike mass that is created by mixing gravel, sand, water and cement.
A chemical process occurs over time gradually hardening the aggregates together. The result is a strong material commonly used for building works but also other applications - as you know - hint hint - concrete work - due to the endless possibilities of molding the fluid mass into shape before it sets.
About two weeks ago I was asked by a lovely client to create an extra large concrete diamond set.
Today I am doing a strength and structure, stability and quality test - well I throw it around! Why?
Due to the size the concrete diamonds would become too heavy. They are supposed to be display/show objects and should offer the option to be easily carried.
My solution is a custom styrofoam core which than is covered by concrete. However as the concrete is now only the shell I needed to test it to ensure it is stable. Okay you got me - anything to throw a bit of concrete around.
Allow me to provide you with some facts.
|| size: 200mm/8inch tall, max width 250mm/10inch
|| this concrete sculpture is 2.5 weeks young
|| finish and structure: concrete, foam core, reinforcement; some crazing [crazing is a network of fine barely visible surface cracks]
Thrown 3 times and I am 1.80m tall.
The tip did break but was still in place due to the fibers. However you could take it apart. One pointy side showed the same signs.
It did not break. These are not natural forces which the sculpture should withhold but it is always good to know that it would and that the structure is sound.
With proper care the concrete diamond sculptures should be fine for a long time.
!!!! DON'T DO IT AT HOME || If you must - always wear safety glasses and proper boots !!!!!
Proper maintenance is necessary to protect your concrete art from the freeze-thaw cycles that occur in the winter. Any piece that can hold water, snow, or ice
[this includes planters and statuary and not just birdbaths and fountains] can be damaged.
Here are some tips on how to minimize possible winter damage.
If a planter is left planted over the winter, raise it up off the ground.
If a planter is going to be empty over the winter it is a good idea to store it in the garage, shed, or porch away from the elements.
If a planter cannot be moved into a garage or shed; empty it and turn the planter upside down. Place the planter onto wood strips, cover or wrap with burlap or any absorbent material, and finally cover it with dark plastic. This will prevent moisture from getting into the planter.
A custom order of 20 cement diamond sets. After the casting they have now spend the night drying and waiting for packaging. Each set will have a small and a large diamond in mix design shapes.
That's it with my little VIP Pass for you. I hope you like what you see.
I thank my lovely customer for her order and trust,
all the best to all of you
11 am time is up - they are good to go;
12 pm gift wrapping is done and the courier is booked - fingers crossed he will be here on time - so the box has to close now ...
more is in my CONCRETE Shop