Original Recycled Plastic Concrete Casting Moulds

In so many ways this is new for me too! I was overwhelmed by your requests for me to come up with diy's and moulds for you guys to enjoy my craft that I wanted to do something really special to show my appreciation for your kindness. It took me a while to find a way to craft moulds of my original designs which you can safely use and enjoy in your home. But that is not all, each mould is featured with complimentary diy instructions on my blog!

Hexagon Concrete Coaster DIY by PASiNGA blog
The hexagon plastic mould is used in this coaster diy enjoy!

Recycled Plastic Hexagon Coaster Mould

A fabulous plastic concrete casting mould made from recycled clear plastic. It is very smooth and will deliver a fine finish to the surface. With care it is re-usable about 4 to 6 times. Have a look at the DIY to find out more!

 

Mould size: H 1.7cm  by at least W and D 14cm

Cast: H 1.5 x W 10 x D 10cm

Hexagon Coaster Mould

£3.50

  • 0.25 kg
  • Available
  • Ships within 3-5 days1

Recycled Plastic Rhombus Coaster Mould

A geometric plastic concrete casting mould made from recycled clear plastic. It is fairly smooth and will deliver a fine finish to the surface. With care it is re-usable about 4 to 6 times. Have a look at the DIY to find out more! 

 

Mould size: H 1.7cm  by at least W 22cm and D 13cm

Cast: max. H 1.5 x W 10 x D 10cm, diagonal length is 15cm

Rhombus

£3.50

  • 0.25 kg
  • Available
  • Ships within 3-5 days1
Geometric Concrete Coaster DIY by PASiNGA blog
The rhombus mould is used in this coaster DIY!

Concrete copper Air Plant holder diy By PASiNGA with three different types of moulds!
The geometric mould is used in this DIY

Geometric Base Plastic Mould

Create your very own geometric concrete base with this reusable plastic casting mould. An original design as used in the concrete copper Air Plant holder diy!

Mould size: H 4 x W 17 x D 17cm

Cast size: top side is almost round with a diameter of 10cm, hexagon base widest point 7.3cm, maximum height 4cm

Made from recycled plastic.
Mould is reusable and an original PASiNGA design.

Geometric Base Plastic Mould

£7.50

  • 0.3 kg
  • Ships within 3-5 days1

Concrete Casting Mould Circus Cube

Create your very own 'Circus Cube', two sides are square all others are triangular shapes, with this reusable plastic casting mould. Follow the diy and recreate or use this mould to craft modern candle holders or paperweights. 

 

Mould size: H 4.5 x W 16 x D 16cm

Cast size: top side square 6cm, base side square 3.5cm, maximum height 4.5cm

Made from recycled plastic.
Mould is reusable and an original PASiNGA design.

Plastic Mould Circus Cube

£5.50

  • 0.3 kg
  • Available
  • Ships within 1-3 days1
DIY Floating Pine Cone PASiNGA Concrete Tutorial
See the circus concrete mould in action here

Exciting news! More moulds and DIY kits are coming soon!

Follow my blog to be the first to know!

DIY Accessories

Fibre Mesh Mat - Concrete Reinforcement

Simple mat reinforcement to help the concrete solid to stay strong. 
A set of 4 sheets of 29 x 21cm [A4]. 

4 Mats A4

£5.00

  • 0.25 kg
  • Available
  • Ships within 3-5 days1

Clear Bumper | Rubber Feet

Self Adhesive Polyurethane Bumper Feet
easily attached to all concrete sculptures for extra protection of glossy or sensitive surfaces
- Pack of 12; Size of single bumper 10 x 3.1mm

Clear Bumper | Rubber Feet, pack of 12

£1.99

  • 0.03 kg
  • Available
  • Ships within 1-3 days1